4candles.co.uk
Helpline : 
WithWeb
Candle Making Tip
To speed up the setting of your votive candle dip the mould in water after you have poured the melted wax. Never do this with glass. This will also give a glassy finish to the side of the candle. Dip to the top of the mould, wear gloves if the mould is too hot for you
UK Candle Making Supplies - Waxed Votive Candle Wick
Candle Wick
Waxed Wick
Votive Wicks
Tea-light Wicks
Oil Burner Wick
Wick Samples
Wooden Wick
This page has our most commonly used votive and small container wicks they have been pre-waxed and assembled with sustainers fitted. If you are unsure of the wick you require you can contact our sales desk for advice or try a votive wick sample pack, either way we recommend that you buy small amounts and test the wick before purchasing larger amounts.
Votive Waxed Wick Assemblies
On This Page
V45/S1-60
V45/S3-80
V45/S5-80
V45/SPC-60
Assembled CSN Votive
Assembled LX Votive
Assembled NT Votive
Use the auto wick pin in votive moulds to leave a hole for wick insertion after the votive candle has been made.
VAT NO: 897784729
Votive Wicks
V45/S1-60
This is a self trimming wick which gives a neat small flame. A full wax pool is achieved coupled with a slow wax consumption rate which makes this wick ideal for scented room freshener candles. Please note that the moulds should not be filled to the top when using this wick, you will still get a 15 hour burn even though
you will use less wax.
60mm long - 15mm Sustainers fitted
For use with Paraffin wax
£2.61 +VAT for 50 - V45/S1-60
Use with Blended paraffin wax and the Votive Mould and Auto Wick Pins
Gives a neat small flame
If using high amounts of fragrance oils in your candle use the S3 or S5 below
Please Note
At busy times there may be a delay in the despatch of the waxed votive wick
V45/S3-80
V45/S5-80
These are self trimming wicks that have a stronger flame than the S1. If you want to have a full sized votive or make container candles using the votive glasses then these wicks are ideal. The S3 votive candle wick has a stronger flame than the S1 wick and the S5 is stronger than the S3 wick.
80mm long - 15mm Sustainers fitted
For use with Paraffin wax
£2.84 +VAT for 50 - V45/S3-80
£2.93 +VAT for 50 - V45/S5-80
Use with Blended paraffin wax and the Votive Mould and Auto Wick Pins
Gives a neat flame
Use with the PRO-C wax if making candles directly in to the votive glasses
V45/SPC-60
This is a self trimming wick which gives a good strong flame. It has two very thin paper cores which give it very good burning abilities that is to say that it can work in just about all paraffin wax blends. This wick has become our best seller as it is often used to replace wicks in votive candles people have purchased that just do not work.
60mm long - 15mm Sustainers fitted
For use with Paraffin wax
£2.93 +VAT for 50 - V45/SPC-60
Use with Blended paraffin wax and the Votive Mould and Auto Wick Pins.
Use this wick if you are making candles using left over paraffin wax from old candles. Reliable wick.
Wedo CSN11 - CSN12 - CSN14
Paraffin or Natural Wax Coating
The CSN wick is a flat, coreless, cotton wick
CSN wicks are particularly successful in lower
melt-point natural waxes.
80mm long - 15mm Sustainers fitted
For use with Soy Wax
£2.84 +VAT for 50 - CSN11
£3.02 +VAT for 50 - CSN12
£3.20 +VAT for 50 - CSN14
Use with EcoSoya container wax to make candles directly in to the votive glasses
Can be affected by the use of large amounts of essential oils in candle wax.
Wedo LX8 - LX10 - LX12 - LX14 - LX16
Paraffin or Natural Wax Coating
The LX wick is a very thin flat cotton wick that has great self trimming capabilities and can be used in Paraffin or Soy waxed candles. For use in votives the LX8 and LX10 are succesful in a paraffin votive candle and the LX14 and LX16 are for use in a soy votive candle.
80mm long - 15mm Sustainers fitted
For use with Paraffin Wax
£2.84 +VAT for 50 - LX8
£2.93 +VAT for 50 - LX10
£2.99 +VAT for 50 - LX12
For use with Soy Wax
£3.11 +VAT for 50 - LX14
£3.20 +VAT for 50 - LX16
Use with Blended paraffin wax and the Votive Mould and Auto Wick Pins
Use with the PRO-C wax if making candles directly in to the votive glasses
Use with EcoSoya Pillar Blend wax and the Votive Mould and Auto Wick Pins
NT29 - NT32 - NT35 Beeswax Votive Wick
Bees Wax Coating
The NT wicks unique braid means it will work well with beeswax votive candles.
In some cases the tip of the wick may need trimming before each lighting of the candle
80mm long - 20mm Sustainers fitted
For use with Beeswax
£3.96 +VAT for 50 - NT29
£4.10 +VAT for 50 - NT32
£4.23 +VAT for 50 - NT35
Use with good quality Beeswax and the Votive Mould and Auto Wick Pins
Use with Beeswax to make candles directly in to the votive glasses